Connect with Us

ITT Controls

3010 - 2013

Barton Instruments 318C Indicating Switch

Model 318C Indicating Switch

The M318C DP Indicating-Switch
meets MIL-S-901C Shock Grade A
and MIL-STD-167 Vibration Specs.
Indicating pointer travels through
a 270° arc over a compact 4-1/2
inch (114 mm) dial. Scales are
calibrated in uniform increments
(DP) or liquid level. Square root gradations are available
for direct reading of flow rate. Special scales exist for fluid
quantity in tanks.
Widely used in jet engine and missile testing programs,
aircraft ground support equipment, water treatment, and
air conditioning systems, where weight and space are
critical. Also used for liquid level indication of materials,
such as: LOX, CO2, helium, nitrogen, hydrogen, and argon.
All models are available in single or dual snap-acting
mechanical contact (SPDT) switch configurations.
They can be set for high or low, or both when two
contacts are furnished.
Set points are adjustable over entire scale, using a control
screw located flush with scale; settings are indicated by
small reference scales in upper quadrants of the main scale.
• AC Rating:
• 5 amps @125V
• 2.5 amps @240V
• DC Rating:
• (Inductive) 2.5 amps @30V
• (Inductive) 0.1 amps @125V
• (Resistive) 4.0 amps @30V

  • American Meter Company
  • Satronic Burner Controls
  • Elco Klockner
  • Dungs
  • Schlumberger Controls
  • Dresser Valves
  • Elco Oskamp
  • Staiger Valves