Connect with Us
  1. Brands
  2. Asco General Controls

Asco General Controls

Asco General Controls H30/H35 ActuatorAsco General Controls S107372 Actuator Replacement KitAsco General Controls Actuator H24Asco General Controls Gas Valves H117
Asco General Controls Actuator H10 / H25Asco General Controls Gas Valves H117Asco General Controls H113 Series Double Block ValveAsco General Controls H12, H15 and H62 Shutoff Valves
Asco General Controls S107372 Actuator Replacement KitAsco General Controls HV11, HV12, HV15 and HV62 Shutoff ValvesAsco General Controls Gas Valve AH4 / V710Asco General Controls Gas Valves H117
Asco General Controls Gas Valves H118Asco General Controls H30/H35 ActuatorAsco General Controls Actuator H11Asco General Controls S107372 Actuator Replacement Kit
Asco General Controls HV11, HV12, HV15 and HV62 Shutoff ValvesAsco General Controls Gas Valve AH8 / V710Asco General Controls H30/H35 ActuatorAsco General Controls H12, H15 and H62 Shutoff Valves

Asco General Controls

Asco Controls offers a wide range of products and is leader in the market of solenoid valves. We combine 100 years of experience with technology. Asco Red Hat offers the largest selection of 2, 3 and 4-way solenoid valves. A solenoid valve is the electromagnetic part of the valve, which consists of a coil. The valves from Asco Controls supplied by ITT Controls are made to run the most demanding fluid control applications.

A two-way (2-way) system has an input and an output, and is used to turn 'on' and 'off' the liquid flow.

A three-way (3-way) system has three pipe connections and two orifices. If an opening is open, then the other will be closed and vice versa. In different positions (open, closed or universal), these valves are often used for a servo motor or a single acting cylinder.
 
A four-way (4-way) system has four or five pipe connections (ports). A pressure inlet, two cylinder ports and one or two outputs to relieve the pressure.

In addition to the valves provide ASCO Controls and ITT Controls provide an extensive line of products such as electronic improved solenoid valves, miniature valves, valves process automation, pneumatic & air preparation equipment, fuel, gas and petroleum products, ATEX approved control valves, sensors and pressure / temperature switches, proportional valves, Navy / Marine solenoid and pneumatic valves, and nuclear products.

Ask for detailed advice from our sales department if you do not know exactly what product you need.
Look for other products in the petrochemical industry also to the rest of our website. Mail for any questions you may have regarding Asco Controls to info@ittcontrols.com

Website: www.ascogeneralcontrols.nl

Asco General Controls AH90 and NH90 Actuators

The Asco AH90 and NH90 Hydramotor Series of Linear Actuators features a completely self-contained, hydraulic power system that has been integrally coupled to a hydraulic cylinder. The positive, firm positioning actuators are ideal for providing efficient and
precise linear control of valves, dampers, louvers, and a wide variety of other equipment requiring an operating thrust of up to 1,500 lbs. (680 kg), 3,000 lbs (1,360kg), or 4,000 lbs. (1,800 kg).

The Asco General Controls AH90 / AH-90 and NH90 / NH-90 Hydramotors series are electro-hydraulic actuators. The actuators are widely used in nuclear power plant systems. They provide critical safety functions such as valve and damper operation. The Hydramotor AH90 / NH90 series are very reliable but regular maintenance and overhaul is very important.

The Asco AH-90 and NH-90 Hydramotor Series of Linear Actuators is qualified as Class IE, safety related equipment for nuclear power generating stations in accordance with IEEE standards 323, 344, 382, and 627.

Regular maintenance and repair of the Asco Hydramotor AH-90 / NH-90 series will significantly reduce certain problems that would otherwise cause a Rule infraction or shutdown. Itt Controls can deliver the necessary parts of the Asco hydramotor AH90/NH90 series and also can deliver the complete actuator.

Other types of the Asco General Controls Hydramotor ah series are: Asco General Controls ah90, ah-90, ah91, ah-91, ah92, ah-92, ah93, ah-93, ah94, ah-94, ah95, ah-95, ah96, ah-96, ah97, ah-97, ah98, ah-98 and ah99, ah-99.

Other types of the Asco General Controls Hydramotor nh series are: General Controls nh90, nh-90, nh91, nh-91, nh92, nh-92, nh93, nh-93, nh94, nh-94, nh95, nh-95, nh96, nh-96, nh97, nh-97, nh98, nh-98 and nh99, nh-99.

Asco AH91 / AH92 / AH93 / AH94 / AH95 / AH96 Actuators

The Asco AH91 / AH92 / AH93 / AH94 / AH95 / AH96 offer effective, state-of-the art and very reliable linear control of HVAC dampers and valves.

Asco General Controls electro hydraulic actuator for HVAC dampers, globe valves, butterfly valves and plug valves series AH91 / AH92 / AH93 / AH94 / AH95 / AH96.

The Asco AH91 / AH96 series feature a simple design for virtually no maintenance. Hydraulic controls are machined in one manifold.

Asco General Controls AH91 / AH96 series provide high trust accuracy and a 100% duty cycle. Manual control and fail-safe actuation for valves and other equipment.

Models AH91, AH92, AH93, AH94, AH95 and AH96 deliver 4000lbs of thrust. Furthermore they have an adjustable strok of 4" maximum, adjustable spring close or spring open and a modulating or on-off.

Asco NH91 / NH92 / NH93 / NH94 / NH95 / NH96 Actuators

The Asco NH91 / NH92 / NH93 / NH94 / NH95 / NH96 offer effective, state-of-the art and very reliable linear control of HVAC dampers and valves.

Asco General Controls NH91 / NH96 series provide high trust accuracy and a 100% duty cycle. Manual control and fail-safe actuation for valves and other equipment.

Models NH91, NH92, NH93, NH94, NH95 en NH96 deliver 4000lbs of thrust. Furthermore they have an adjustable strok of 4" maximum, adjustable spring close or spring open and a modulating or on-off.

Asco General Controls electro hydraulic actuator for HVAC dampers, globe valves, butterfly valves and plug valves series AH91 / AH92 / AH93 / AH94 / AH95 / AH96.

The Asco NH91 / NH96 series feature a simple design for virtually no maintenance. Hydraulic controls are machined in one manifold.

Asco AH97/NH97 and AH98 and NH98 series Actuators

The Asco General Controls AH97 / AH-97, NH97 / NH-97 and H98 / AH-98,  NH98 / NH-98 Hydramotors series are electro-hydraulic actuators. The actuators are widely used in nuclear power plant systems. They provide critical safety functions such as valve and damper operation. The Hydramotor AH97/AH-97, NH97/NH-97 and H98/AH-98,  NH98/NH-98 series are very reliable but regular maintenance and overhaul is very important.

Regular maintenance and repair of the Asco Hydramotor AH97/AH-97, NH97/NH-97 and H98/AH-98, NH98/NH-98 series will significantly reduce certain problems that would otherwise cause a Rule infraction or shutdown. Itt Controls can deliver the necessary parts of the Asco hydramotor AH97/AH-97, NH97/NH-97 and H98/AH-98, NH98/NH-98 series and also can deliver the complete actuator.

The Asco AH97/AH-97, NH97/NH-97 and H98/AH-98, NH98/NH-98 Hydramotor Series of Linear Actuators is qualified as Class IE, safety related equipment for nuclear power generating stations in accordance with IEEE standards 323, 344, 382, and 627.

The Asco Hydramotor Series of Linear Actuators features a completely self-contained, hydraulic power system that has been integrally coupled to a hydraulic cylinder. The positive, firm positioning actuators are ideal for providing efficient and precise linear control of valves, dampers, louvers, and a wide variety of other equipment requiring an operating thrust of up to 1,500 lbs. (680 kg), 3,000 lbs (1,360kg), or 4,000 lbs. (1,800 kg).

Asco General Controls Gas Valve AH4 / V710

Asco General Controls Gas Valves are with or without valve seal overtravel interlock (FM Proof of closure). For on-off main line gas control.

image content

Asco General Controls Gas Valve AH8 / V710

The Asco General Controls Gas Valve AH8 / V710 is a proportioning control with low fire positioning. It is a line voltage actuator which permits limit and safety controls to be wired directly into line voltage power circuit. The Asco General Controls AH8 provides adjustable low fire positioning and proportioning control between low and high fire positions. It is a modulating, push-type, self-contained and electrohydraulic linear actuator. It features an electronic controller
for accurate positioning. The low-fire position is factory set at the stroke midpoint. It can be field adjustable to any position up to 100% of stroke.

image content

Asco General Controls Gas Valve AH14 / V710

The Asco General Controls AH14 / V710 actuator has a separate on-off and is electro-hydraulic. It is for use in conjunction with safety shut-off valves in semi-automatic gas-fired single burner, boiler and furnace applications.

image content

Asco General Controls S107372 Actuator Replacement Kit

The Asco General Controls S107372 Actuator Replacement Kit for HO Asco General Controls Gas Valves is designed for use with HO Series Asco General Controls Gas Valve bodies. It allows interchangeabillity of actuators without removing the existing HP valve body from the line. Consists of a new improved AH13 actuator and valve bonnet assembly together with all the necessary parts.

image content

Asco General Controls Gas Valves H117

The Asco General Controls H117 Fuel Gas Valve is a normally closed coombination of Asco General Controls actuator and safety shutoff/control gas valve. It Is used for commercial and industrial burners in applications such as furnaces, dryers, dehydrators, conversion burners and heaters.

image content

Asco General Controls Gas Valves H118

The Asco General Controls H118 Fuel Gas Valve is a normally closed coombination of Asco General Controls actuator and safety shutoff/control gas valve. It Is used for commercial and industrial burners in applications such as furnaces, dryers, dehydrators, conversion burners and heaters.

image content

Asco General Controls Fuel Gas Valves H137

The Asco General Controls H137 Fuel Gas Valve is a two-way, normally closed, safety shutoff valve providing trouble free, electrohydraulic, on-off control of combustion gas for boilers, industrial furnaces, dryers, dehydrators, large conversion burners, air heaters and similar applications.

image content

Asco General Controls HV11, HV12, HV15 and HV62 Shutoff Valves

The Asco General Controls HV11 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The HV11 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

image content

Asco General Controls H30/H35 Actuator

The Asco General Controls H30/H35 are electrohydraulic, linear actuators. They feature a completely self-contained, sealed, hydraulic motor/pump power unit coupled to a hydraulic cylinder container both piston/shaft assembly and return spring.

image content

Asco General Controls Actuator H10 / H25

The Asco General Controls Actuator H10 /H25 is a fail-safe electrohydraulic linear actuator. They feature a completely seld-contained, sealed, hydraulic motor/pump power unit coupled to a hydraulic cylinder containing both the piston/shaft assembly and return-spring.

The Asco General Controls H10/H25 series are the result of over 50 years of experience in designing, testing, manufactoring and servicing electrohydaulically powered actuators.

H10 and H25 from the Asco General Controls series are available in both push an pull power stroke, with a choice of either spring-return or lock-in-last position upon loss of power.

Considerable field experience has proven the H10/H25 series to be extreme reliable. With minimum service requirements and a prolonged service life. The need for gears has been eleminated in favor of a modular design using fewer moving internal components and industry proven heat-resistant seals - immersed in oil for continuous lubrication.

The Asco General Controls H10 and H25 series are available at ITT Controls. For more info about the H10 or H25 series you can contact ITT Controls at info@ittcontrols.com

image content

Asco General Controls Actuator H11

The Asco General Controls Actuator H11 is a two position, spring-return, pull-type shaft that retracts on application of power and spring-returns on loss of power.

The Asco General Controls H11 serie is the result of over 50 years of experience in designing, testing, manufactoring and servicing electrohydaulically powered actuators.

H11 serie of Asco General Controls is available in both push an pull power stroke, with a choice of either spring-return or lock-in-last position upon loss of power.

Considerable field experience has proven the H11 series to be extreme reliable. With minimum service requirements and a prolonged service life. The need for gears has been eleminated in favor of a modular design using fewer moving internal components and industry proven heat-resistant seals - immersed in oil for continuous lubrication.

The Asco General Controls H11 serie is available at ITT Controls. For more info about the H11 series you can contact ITT Controls at info@ittcontrols.com

image content

Asco General Controls Actuator H24

The Asco General Controls H24 serie is a two-postion, lock-in-last Position, pull-type. The shaft retracts on application of power; lock-in-last position on power failure, spring-return when relief valve is energized. Normally-closed relief valve wired independently of motor circuit.

The Asco General Controls H24 serie is the result of over 50 years of experience in designing, testing, manufactoring and servicing electrohydaulically powered actuators.

H24 serie of Asco General Controls is available in both push an pull power stroke, with a choice of either spring-return or lock-in-last position upon loss of power.

Considerable field experience has proven the H24 series to be extreme reliable. With minimum service requirements and a prolonged service life. The need for gears has been eleminated in favor of a modular design using fewer moving internal components and industry proven heat-resistant seals - immersed in oil for continuous lubrication.

The Asco General Controls H24 serie is available at ITT Controls. For more info about the H24 series you can contact ITT Controls at info@ittcontrols.com

image content

Asco General Controls H113 Series Double Block Valve

The patent pending design of the Asco General Controls incorporates a single aluminum body containing two distinct shutoff valves and one new watertight Asco General Controls actuator. An optional and patent pending Posi-Prove system dynamically tests valve seal tightness and conducts a self-check automatically upon system startup.

The patent pending double block valve design of the Asco General Controls H113 incorporates the following unique features:

  • Two shut-off valves within a single body reduces gas train length and cost.
  • Two independent operating shafts accomplish valve closure.
  • Unique flange design makes installation and maintenance easy.
  • Inlet screen prevents debris from obstructing valve closure and improves seal life.
  • Manual tester or optional Posi-Prove system verifies seat closure integrity.
  • Visual position indication of both valves is standard.
  • Standard valve construction uses silicone-free lubricants.
  • Wide range of pipe sizes 3/4" through 3".
  • Maximum operating pressure differential up to 25 PSI.

The new Asco General Controls actuator incorporates two separate means of releasing the actuator shaft when de-energized. The actuator enclosure meets Watertight, Dusttight, Driptight and General Purpose requirements and eliminates the cost associated with stocking separate actuators.

If you need more information  about the Asco General Controls H113 Valve please contact ITT Controls at info@ittcontrols.com. Besides the Asco General Controls H113 Valve we can deliver al other Asco General Controls series as well.

image content

Asco General Controls H12, H15 and H62 Shutoff Valves

The Asco General Controls H11 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The H11 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

The Asco General Controls H12 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The H12 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

The Asco General Controls H15 Shutoff Valve is a 2-way, normally closed valve with a steel alloy body. The H15 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

The Asco General Controls H62 Shutoff Valve is a 2-way, normally closed valve with a carbon steel body. The H62 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

Almost all types of Asco General Controls Valves are available at ITT Controls. If you don't know what type of valve is suitable for your configuration please don't hesitate to contact the sales department of ITT Controls at info@ittcontrols.com.

image content

Asco General Controls AH90 / NH90 electro hydraulic actuators

The AH90 / AH-90 and NH90 / NH-90 Asco General Controlss series are electro-hydraulic actuators. The actuators are widely used in nuclear power plant systems. They provide critical safety functions such as valve and damper operation. The Asco General Controls AH90 / NH90 series are very reliable but regular maintenance and overhaul is very important.

Regular maintenance and repair of the Asco General Controls AH-90 / NH-90 series will significantly reduce certain problems that would otherwise cause a Rule infraction or shutdown. Itt Controls can deliver the necessary parts of the Asco General Controls AH90/NH90 series and also can deliver the complete actuator.

The AH90 and NH90 Asco General Controls Series of Linear Actuators features a completely self-contained, hydraulic power system that has been integrally coupled to a hydraulic cylinder. The positive, firm positioning actuators are ideal for providing efficient and
precise linear control of valves, dampers, louvers, and a wide variety of other equipment requiring an operating thrust of up to 1,500 lbs. (680 kg), 3,000 lbs (1,360kg), or 4,000 lbs. (1,800 kg).

The AH-90 and NH-90 Asco General Controls Series of Linear Actuators is qualified as Class IE, safety related equipment for nuclear power generating stations in accordance with IEEE standards 323, 344, 382, and 627.

Other types of the General Controls Asco General Controls ah series are: General Controls ah90, ah-90, ah91, ah-91, ah92, ah-92, ah93, ah-93, ah94, ah-94, ah95, ah-95, ah96, ah-96, ah97, ah-97, ah98, ah-98 and ah99, ah-99.

Other types of the General Controls Asco General Controls nh series are: General Controls nh90, nh-90, nh91, nh-91, nh92, nh-92, nh93, nh-93, nh94, nh-94, nh95, nh-95, nh96, nh-96, nh97, nh-97, nh98, nh-98 and nh99, nh-99.



image content