Connect with Us
  1. Brands
  2. DGC Controls

DGC Controls

DGC Controls Solenoid Valves 2-WayDGC Controls Linear and Rotary ActuatorsDGC Controls Gas Vent ValvesDGC Controls Hydramotor Gas Valves H117
DGC Controls Hydramotor Gas Valve AH8 / V710DGC Controls Special Purpose ValvesDGC Controls Solenoid Valves 2-WayDGC Controls Combustion Controls
DGC Controls Hydramotor Actuator H11DGC Controls Combustion ControlsDGC Controls Various ModelsDGC Controls Hydramotor H113 Series
DGC Controls Hydramotor Actuator H11DGC Controls Hydramotor Gas Valve AH14 / V710DGC Controls Hydramotor Fuel Gas Valves H137 DGC Controls Combustion Valves
DGC Controls Hydramotor Actuator H24DGC Controls Hydramotor Gas Valve AH14 / V710DGC Controls Hydramotor Actuator H10 / H25DGC Controls Thermopilot

DGC Controls

ITT Controls also supplies products and components from DGC Controls. In the petrochemical and process industry these products are widely used and indispensable for every / HVAC maintenance. The brand itself no longer exists but many products and parts are still available. ITT Controls can help if you need anything.

ITT Controls advises, supplies spare parts, repairs and does product maintenance in the petrochemical and process industries. The strength of ITT Controls lies in the knowledge of the products such as DGC Controls. For electrical, hydraulic and pneumatic systems ITT Controls thinks along to tailor products to both large and small customers.
 
Interrupting work because something is defective or maintenance is required on DGC Controls products means extra work for all involved. It is therefore important that such a pauze is restricted to a minimum. Here ITT Controls steps in. Because we can respond appropriately to any situation and quickly deliver products and components, we are the partner in the field of petrochemical and process industries.
 
ITT Controls supply heat pumps, groundwater pumps, gas meters, gas regulators, pressure gauges, pressure regulators, control valves, globe valves, open-close ball valves, butterfly valves, valves with rotary actuators, pressure independent ball valves, manual valves and filters, pressure switches, combination controls and DGC Controls parts, electronic flame detection and control, pilot burners and burners, further inflammation and control, thermoelectric safety, heating controllers Comfort Controls and measuring and testing equipment and virtually any product that is found in the oil and gas industry.
 
If you want more information on products, parts and accessories of DGC Controls please contact the sales department at info@ittcontrols.com

Website: www.dgc-controls.com

DGC Controls Solenoid Valves 2-Way

DGC Controls 2-Way Solenoid Valves are made of highly versatile stainless steel and have a general purpose for pressures up to 1050 psi. Ideally suited for laundry, and dry-cleaning machines, welding equipment, petroleum industry, flame cutting, etc. DGC Controls valves handle steam as well as liquids and gases. The DGC Controls valves can be mounted in any position. Normally closed en Normally open models are available.

image content

DGC Controls Solenoid Valves 3-Way

The workhorse of the DGC Controls Valve is the 3-way valve family. Capable of handling much higher pressures and flow capacities than its sister valves. It can be mounted in any position with bubble tight shut-off. The DGC Controls 3-way valves are available in different flow modes: normally closed, normally open, directional, universal and exhaust-to-air.

image content

DGC Controls Special Purpose Valves

DGC Controls Special Purpose Valves are shock and vibration resistant. The PV1C magnetic valves have been engineered to function under the rugged operating conditions of the road. Acceleration: 25G's. Especially designed to handle either gasoline or high pressure butane/propane gas, the DGC Controls PV1C is suited for dual fuel control and provides safe and convenient operation in systems where the fuel is switched on and off simultanously with the ignition switch. Dependable under difficult conditions, such as shock an vibration encountered in the operation of trucks and buses.

image content

DGC Controls Combustion Controls

DGC Controls offers a various range of combustion controls for different types of configurations. For instance all types of gas-fired heating equipment, warm air furnaces, boilers, industrial burners, and unit heaters in domestic and commercial installations.

image content

DGC Controls Linear and Rotary Actuators

DGC Controls DL64/DL66 series are powerful, electric linear actuators developed for converting manually actuated equipment to remote manual control or to automatic on-of, floating, or proportional control. Versatile mounting of the actuator permits easy adaption to existing equipment in the field without removing the valve or breaking lines.

image content

DGC Controls Thermopilot

DGC Controls has safe lightning electrical contacting devices which provide automatic safety shut-off of main line automatic gas valves. Different types of models for remote mounting or manual reset plug-in type with four prong connector for direct mounting to valves. Single couple or pilot generator operated.

image content

DGC Controls Various Models

DGC Controls has many valve product types and accesiores. ITT Controls can deliver all of these types for different purposes. Some of these products that ITT Controls can provide are:

image content

DGC Controls Shutoff Gas Valves

DGC Controls Safety Shutoff Gas Valves come in different types.

image content

DGC Controls Gas Vent Valves

DGC Controls Gas Vent Valves come in different models.

image content

DGC Controls Oil - Steam - Liquid Valves

DGC Controls Oil/Steam/Liquid Safety Shutoff Valves come in different types and models. ITT Controls can advise and deliver you the right product for your specific situation.

image content

DGC Controls Combustion Valves

The ITT General Solenoid valves are designed to control the flow of fuel gases in industrial and commercial gas burner systems. The valves are suitable for main line, pilot line and venting applications. Burner construction valves are designed to handle liquified petroleum gases (propane) in both the liquid and gaseous states. Series 8030, 8040, 8044 and 8262 are direct acting constructions. Series 8042, 8043, 8210,8214 and 8215 valves are internal pilot operated constructions.

image content

DGC Controls Hydramotor AH4 / V710

Hydramotor Gas Valves are with or without valve seal overtravel interlock (FM Proof of closure). For on-off main line gas control.

image content

DGC Controls Hydramotor Gas Valve AH8 / V710

The Hydramotor Gas Valve AH8 / V710 is a proportioning control with low fire positioning. It is a line voltage actuator which permits limit and safety controls to be wired directly into line voltage power circuit. The Hydramotor AH8 provides adjustable low fire positioning and proportioning control between low and high fire positions. It is a modulating, push-type, self-contained and electrohydraulic linear actuator. It features an electronic controller
for accurate positioning. The low-fire position is factory set at the stroke midpoint. It can be field adjustable to any position up to 100% of stroke.

image content

DGC Controls Hydramotor Gas Valve AH14 / V710

The Hydramotor AH14 / V710 actuator has a separate on-off and is electro-hydraulic. It is for use in conjunction with safety shut-off valves in semi-automatic gas-fired single burner, boiler and furnace applications.

image content

DGC Controls Hydramotor S107372 Actuator Replacement Kit

The Hydramotor S107372 Actuator Replacement Kit for HO Hydramotor Gas Valves is designed for use with HO Series Hydramotor Gas Valve bodies. It allows interchangeabillity of actuators without removing the existing HP valve body from the line. Consists of a new improved AH13 actuator and valve bonnet assembly together with all the necessary parts.

image content

DGC Controls Hydramotor Gas Valves H117

The Hydramotor H117 Fuel Gas Valve is a normally closed coombination of Hydramotor actuator and safety shutoff/control gas valve. It Is used for commercial and industrial burners in applications such as furnaces, dryers, dehydrators, conversion burners and heaters.

image content

DGC Controls Hydramotor Gas Valves H118

The General Controls Hydramotor H118 Fuel Gas Valve is a normally closed coombination of Hydramotor actuator and safety shutoff/control gas valve. It Is used for commercial and industrial burners in applications such as furnaces, dryers, dehydrators, conversion burners and heaters.

DGC Controls Hydramotor Fuel Gas Valves H137

The Hydramotor H137 Fuel Gas Valve is a two-way, normally closed, safety shutoff valve providing trouble free, electrohydraulic, on-off control of combustion gas for boilers, industrial furnaces, dryers, dehydrators, large conversion burners, air heaters and similar applications.

image content

DGC Controls Hydramotor HV11, HV12, HV15 and HV62

The Hydramotor HV11 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The HV11 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

image content

DGC Controls Hydramotor H30/H35

The Hydramotor H30/H35 are electrohydraulic, linear actuators. They feature a completely self-contained, sealed, hydraulic motor/pump power unit coupled to a hydraulic cylinder container both piston/shaft assembly and return spring.

image content

DGC Controls Hydramotor Actuator H10 / H25

The Hydramotor Actuator H10 /H25 is a fail-safe electrohydraulic linear actuator. They feature a completely seld-contained, sealed, hydraulic motor/pump power unit coupled to a hydraulic cylinder containing both the piston/shaft assembly and return-spring.

The Hydramotor H10/H25 series are the result of over 50 years of experience in designing, testing, manufactoring and servicing electrohydaulically powered actuators.

H10 and H25 from the hydramotor series are available in both push an pull power stroke, with a choice of either spring-return or lock-in-last position upon loss of power.

Considerable field experience has proven the H10/H25 series to be extreme reliable. With minimum service requirements and a prolonged service life. The need for gears has been eleminated in favor of a modular design using fewer moving internal components and industry proven heat-resistant seals - immersed in oil for continuous lubrication.

The Hydramotor H10 and H25 series are available at ITT Controls. For more info about the H10 or H25 series you can contact ITT Controls at info@ittcontrols.com

image content

DGC Controls Hydramotor Actuator H11

The Hydramotor Actuator H11 is a two position, spring-return, pull-type shaft that retracts on application of power and spring-returns on loss of power.

The Hydramotor H11 serie is the result of over 50 years of experience in designing, testing, manufactoring and servicing electrohydaulically powered actuators.

H11 serie of hydramotor is available in both push an pull power stroke, with a choice of either spring-return or lock-in-last position upon loss of power.

Considerable field experience has proven the H11 series to be extreme reliable. With minimum service requirements and a prolonged service life. The need for gears has been eleminated in favor of a modular design using fewer moving internal components and industry proven heat-resistant seals - immersed in oil for continuous lubrication.

The Hydramotor H11 serie is available at ITT Controls. For more info about the H11 series you can contact ITT Controls at info@ittcontrols.com

image content

DGC Controls Hydramotor Actuator H24

The Hydramotor H24 serie is a two-postion, lock-in-last Position, pull-type. The shaft retracts on application of power; lock-in-last position on power failure, spring-return when relief valve is energized. Normally-closed relief valve wired independently of motor circuit.

The Hydramotor H24 serie is the result of over 50 years of experience in designing, testing, manufactoring and servicing electrohydaulically powered actuators.

H24 serie of hydramotor is available in both push an pull power stroke, with a choice of either spring-return or lock-in-last position upon loss of power.

Considerable field experience has proven the H24 series to be extreme reliable. With minimum service requirements and a prolonged service life. The need for gears has been eleminated in favor of a modular design using fewer moving internal components and industry proven heat-resistant seals - immersed in oil for continuous lubrication.

The Hydramotor H24 serie is available at ITT Controls. For more info about the H24 series you can contact ITT Controls at info@ittcontrols.com

image content

DGC Controls Hydramotor H113 Series

The patent pending design of the Hydramotor incorporates a single aluminum body containing two distinct shutoff valves and one new watertight Hydramotor actuator. An optional and patent pending Posi-Prove system dynamically tests valve seal tightness and conducts a self-check automatically upon system startup.

The patent pending double block valve design of the Hydramotor H113 incorporates the following unique features:

  • Two shut-off valves within a single body reduces gas train length and cost.
  • Two independent operating shafts accomplish valve closure.
  • Unique flange design makes installation and maintenance easy.
  • Inlet screen prevents debris from obstructing valve closure and improves seal life.
  • Manual tester or optional Posi-Prove system verifies seat closure integrity.
  • Visual position indication of both valves is standard.
  • Standard valve construction uses silicone-free lubricants.
  • Wide range of pipe sizes 3/4" through 3".
  • Maximum operating pressure differential up to 25 PSI.

The new Hydramotor actuator incorporates two separate means of releasing the actuator shaft when de-energized. The actuator enclosure meets Watertight, Dusttight, Driptight and General Purpose requirements and eliminates the cost associated with stocking separate actuators.

If you need more information  about the Hydramotor H113 Valve please contact ITT Controls at info@ittcontrols.com. Besides the Hydramotor H113 Valve we can deliver al other Hydramotor series as well.

image content

DGC Controls Hydramotor H12, H15 and H62

The Hydramotor H11 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The H11 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

The Hydramotor H12 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The H12 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

The Hydramotor H15 Shutoff Valve is a 2-way, normally closed valve with a steel alloy body. The H15 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

The Hydramotor H62 Shutoff Valve is a 2-way, normally closed valve with a carbon steel body. The H62 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

Almost all types of Hydramotor Valves are available at ITT Controls. If you don't know what type of valve is suitable for your configuration please don't hesitate to contact the sales department of ITT Controls at info@ittcontrols.com.

image content

DGC Controls Hydramotor AH90 / NH90

The AH90 / AH-90 and NH90 / NH-90 Hydramotors series are electro-hydraulic actuators. The actuators are widely used in nuclear power plant systems. They provide critical safety functions such as valve and damper operation. The Hydramotor AH90 / NH90 series are very reliable but regular maintenance and overhaul is very important.

Regular maintenance and repair of the Hydramotor AH-90 / NH-90 series will significantly reduce certain problems that would otherwise cause a Rule infraction or shutdown. Itt Controls can deliver the necessary parts of the hydramotor AH90/NH90 series and also can deliver the complete actuator.

The AH90 and NH90 Hydramotor Series of Linear Actuators features a completely self-contained, hydraulic power system that has been integrally coupled to a hydraulic cylinder. The positive, firm positioning actuators are ideal for providing efficient and
precise linear control of valves, dampers, louvers, and a wide variety of other equipment requiring an operating thrust of up to 1,500 lbs. (680 kg), 3,000 lbs (1,360kg), or 4,000 lbs. (1,800 kg).

The AH-90 and NH-90 Hydramotor Series of Linear Actuators is qualified as Class IE, safety related equipment for nuclear power generating stations in accordance with IEEE standards 323, 344, 382, and 627.

Other types of the General Controls Hydramotor ah series are: General Controls ah90, ah-90, ah91, ah-91, ah92, ah-92, ah93, ah-93, ah94, ah-94, ah95, ah-95, ah96, ah-96, ah97, ah-97, ah98, ah-98 and ah99, ah-99.

Other types of the General Controls Hydramotor nh series are: General Controls nh90, nh-90, nh91, nh-91, nh92, nh-92, nh93, nh-93, nh94, nh-94, nh95, nh-95, nh96, nh-96, nh97, nh-97, nh98, nh-98 and nh99, nh-99.

image content