Connect with Us
  1. Brands
  2. Drager ITT

Drager ITT

Drager ITT Hydramotor Actuator H10 / H25Drager ITT Shutoff Gas ValvesDrager ITT Hydramotor Gas Valves H117Drager ITT Hydramotor Actuator H11
Drager ITT Gas Vent ValvesDrager ITT Hydramotor Gas Valves H117Drager ITT Solenoid Valves 3-WayDrager ITT Special Purpose Valves
Drager ITT ThermopilotDrager ITT Shutoff Gas ValvesDrager ITT Oil - Steam - Liquid ValvesDrager ITT Hydramotor AH90 / NH90
Drager ITT Hydramotor Gas Valve AH8 / V710Drager ITT Oil - Steam - Liquid ValvesDrager ITT Hydramotor Gas Valves H117Drager ITT Shutoff Gas Valves
Drager ITT Hydramotor H12, H15 and H62Drager ITT Hydramotor Gas Valves H117Drager ITT Combustion ControlsDrager ITT Hydramotor AH90 / NH90

Drager ITT

ITT Controls also supplies products and parts from Drager (ITT) and especially the products and components for the petrochemical and process industry. Without petroleum developments such as automotive fuel, fiberglass or tires would be unthinkable. However, in order to come to such a product, many steps are required in order to fabricate it into a final product. The beginning of this chain is the processing of crude oil in refineries.

Petrochemical industry is bulk production. The production is therefore enormous, but the number of processes, on a global scale, are quite small. Many procedures and processes are therefore standardized and there are often safety rules and regulations to take note of.
 
Oil and gas winning often occur in extreme circumstances and therefore it is essential that all techniques used are according the highest quality standards. This is also the reason why Drager equipment is often used. They distinguish themselves because of their durability, robustness and reliable and safe operation. ITT Controls offers all products and components made by Drager such as gas detection and gas detection. Did you know Drager has the smallest 5-gas measuring instrument in the world?!
 
The interruption of workflow, because something is defective or because maintenance is required, means extra work for all concerned. It is thus important that such a pause of operations must be minimized to a minimum. ITT Controls can advise and be of service. Because we can respond appropriately to any situation and deliver products and parts quickly we are the best partner in the petrochemical and process industry you can find.
 
If you want more information of our services please contact the sales department or email info@ittcontrols.com. With over 40 years of experience in this industry ITT Controls definitely can make a difference!
 

Website: www.drager-instruments.com

Drager ITT Solenoid Valves 2-Way

Drager ITT 2-Way Solenoid Valves are made of highly versatile stainless steel and have a general purpose for pressures up to 1050 psi. Ideally suited for laundry, and dry-cleaning machines, welding equipment, petroleum industry, flame cutting, etc. Drager ITT valves handle steam as well as liquids and gases. The Drager ITT valves can be mounted in any position. Normally closed en Normally open models are available.

image content

Drager ITT Solenoid Valves 3-Way

The workhorse of the Drager ITT Valve is the 3-way valve family. Capable of handling much higher pressures and flow capacities than its sister valves. It can be mounted in any position with bubble tight shut-off. The Drager ITT 3-way valves are available in different flow modes: normally closed, normally open, directional, universal and exhaust-to-air.

image content

Drager ITT Special Purpose Valves

Drager ITT Special Purpose Valves are shock and vibration resistant. The PV1C magnetic valves have been engineered to function under the rugged operating conditions of the road. Acceleration: 25G's. Especially designed to handle either gasoline or high pressure butane/propane gas, the Drager ITT PV1C is suited for dual fuel control and provides safe and convenient operation in systems where the fuel is switched on and off simultanously with the ignition switch. Dependable under difficult conditions, such as shock an vibration encountered in the operation of trucks and buses.

image content

Drager ITT Combustion Controls

Drager ITT offers a various range of combustion controls for different types of configurations. For instance all types of gas-fired heating equipment, warm air furnaces, boilers, industrial burners, and unit heaters in domestic and commercial installations.

image content

Drager ITT Linear and Rotary Actuators

Drager ITT DL64/DL66 series are powerful, electric linear actuators developed for converting manually actuated equipment to remote manual control or to automatic on-of, floating, or proportional control. Versatile mounting of the actuator permits easy adaption to existing equipment in the field without removing the valve or breaking lines.

image content

Drager ITT Thermopilot

Drager ITT has safe lightning electrical contacting devices which provide automatic safety shut-off of main line automatic gas valves. Different types of models for remote mounting or manual reset plug-in type with four prong connector for direct mounting to valves. Single couple or pilot generator operated.

image content

Drager ITT Various Models

Drager ITT has many valve product types and accesiores. ITT Controls can deliver all of these types for different purposes. Some of these products that ITT Controls can provide are:

image content

Drager ITT Shutoff Gas Valves

Drager ITT Safety Shutoff Gas Valves come in different types.

image content

Drager ITT Gas Vent Valves

Drager ITT Gas Vent Valves come in different models.

image content

Drager ITT Oil - Steam - Liquid Valves

Drager ITT Oil/Steam/Liquid Safety Shutoff Valves come in different types and models. ITT Controls can advise and deliver you the right product for your specific situation.

image content

Drager ITT Combustion Valves

The ITT General Solenoid valves are designed to control the flow of fuel gases in industrial and commercial gas burner systems. The valves are suitable for main line, pilot line and venting applications. Burner construction valves are designed to handle liquified petroleum gases (propane) in both the liquid and gaseous states. Series 8030, 8040, 8044 and 8262 are direct acting constructions. Series 8042, 8043, 8210,8214 and 8215 valves are internal pilot operated constructions.

image content

Drager ITT Hydramotor AH4 / V710

Hydramotor Gas Valves are with or without valve seal overtravel interlock (FM Proof of closure). For on-off main line gas control.

image content

Drager ITT Hydramotor Gas Valve AH8 / V710

The Hydramotor Gas Valve AH8 / V710 is a proportioning control with low fire positioning. It is a line voltage actuator which permits limit and safety controls to be wired directly into line voltage power circuit. The Hydramotor AH8 provides adjustable low fire positioning and proportioning control between low and high fire positions. It is a modulating, push-type, self-contained and electrohydraulic linear actuator. It features an electronic controller
for accurate positioning. The low-fire position is factory set at the stroke midpoint. It can be field adjustable to any position up to 100% of stroke.

image content

Drager ITT Hydramotor Gas Valve AH14 / V710

The Hydramotor AH14 / V710 actuator has a separate on-off and is electro-hydraulic. It is for use in conjunction with safety shut-off valves in semi-automatic gas-fired single burner, boiler and furnace applications.

image content

Drager ITT Hydramotor S107372 Actuator Replacement Kit

The Hydramotor S107372 Actuator Replacement Kit for HO Hydramotor Gas Valves is designed for use with HO Series Hydramotor Gas Valve bodies. It allows interchangeabillity of actuators without removing the existing HP valve body from the line. Consists of a new improved AH13 actuator and valve bonnet assembly together with all the necessary parts.

image content

Drager ITT Hydramotor Gas Valves H117

The Hydramotor H117 Fuel Gas Valve is a normally closed coombination of Hydramotor actuator and safety shutoff/control gas valve. It Is used for commercial and industrial burners in applications such as furnaces, dryers, dehydrators, conversion burners and heaters.

image content

Drager ITT Hydramotor Gas Valves H118

The General Controls Hydramotor H118 Fuel Gas Valve is a normally closed coombination of Hydramotor actuator and safety shutoff/control gas valve. It Is used for commercial and industrial burners in applications such as furnaces, dryers, dehydrators, conversion burners and heaters.

Drager ITT Hydramotor Fuel Gas Valves H137

The Hydramotor H137 Fuel Gas Valve is a two-way, normally closed, safety shutoff valve providing trouble free, electrohydraulic, on-off control of combustion gas for boilers, industrial furnaces, dryers, dehydrators, large conversion burners, air heaters and similar applications.

image content

Drager ITT Hydramotor HV11, HV12, HV15 and HV62

The Hydramotor HV11 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The HV11 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

image content

Drager ITT Hydramotor H30/H35

The Hydramotor H30/H35 are electrohydraulic, linear actuators. They feature a completely self-contained, sealed, hydraulic motor/pump power unit coupled to a hydraulic cylinder container both piston/shaft assembly and return spring.

image content

Drager ITT Hydramotor Actuator H10 / H25

The Hydramotor Actuator H10 /H25 is a fail-safe electrohydraulic linear actuator. They feature a completely seld-contained, sealed, hydraulic motor/pump power unit coupled to a hydraulic cylinder containing both the piston/shaft assembly and return-spring.

The Hydramotor H10/H25 series are the result of over 50 years of experience in designing, testing, manufactoring and servicing electrohydaulically powered actuators.

H10 and H25 from the hydramotor series are available in both push an pull power stroke, with a choice of either spring-return or lock-in-last position upon loss of power.

Considerable field experience has proven the H10/H25 series to be extreme reliable. With minimum service requirements and a prolonged service life. The need for gears has been eleminated in favor of a modular design using fewer moving internal components and industry proven heat-resistant seals - immersed in oil for continuous lubrication.

The Hydramotor H10 and H25 series are available at ITT Controls. For more info about the H10 or H25 series you can contact ITT Controls at info@ittcontrols.com

image content

Drager ITT Hydramotor Actuator H11

The Hydramotor Actuator H11 is a two position, spring-return, pull-type shaft that retracts on application of power and spring-returns on loss of power.

The Hydramotor H11 serie is the result of over 50 years of experience in designing, testing, manufactoring and servicing electrohydaulically powered actuators.

H11 serie of hydramotor is available in both push an pull power stroke, with a choice of either spring-return or lock-in-last position upon loss of power.

Considerable field experience has proven the H11 series to be extreme reliable. With minimum service requirements and a prolonged service life. The need for gears has been eleminated in favor of a modular design using fewer moving internal components and industry proven heat-resistant seals - immersed in oil for continuous lubrication.

The Hydramotor H11 serie is available at ITT Controls. For more info about the H11 series you can contact ITT Controls at info@ittcontrols.com

image content

Drager ITT Hydramotor Actuator H24

The Hydramotor H24 serie is a two-postion, lock-in-last Position, pull-type. The shaft retracts on application of power; lock-in-last position on power failure, spring-return when relief valve is energized. Normally-closed relief valve wired independently of motor circuit.

The Hydramotor H24 serie is the result of over 50 years of experience in designing, testing, manufactoring and servicing electrohydaulically powered actuators.

H24 serie of hydramotor is available in both push an pull power stroke, with a choice of either spring-return or lock-in-last position upon loss of power.

Considerable field experience has proven the H24 series to be extreme reliable. With minimum service requirements and a prolonged service life. The need for gears has been eleminated in favor of a modular design using fewer moving internal components and industry proven heat-resistant seals - immersed in oil for continuous lubrication.

The Hydramotor H24 serie is available at ITT Controls. For more info about the H24 series you can contact ITT Controls at info@ittcontrols.com

image content

Drager ITT Hydramotor H113 Series

The patent pending design of the Hydramotor incorporates a single aluminum body containing two distinct shutoff valves and one new watertight Hydramotor actuator. An optional and patent pending Posi-Prove system dynamically tests valve seal tightness and conducts a self-check automatically upon system startup.

The patent pending double block valve design of the Hydramotor H113 incorporates the following unique features:

  • Two shut-off valves within a single body reduces gas train length and cost.
  • Two independent operating shafts accomplish valve closure.
  • Unique flange design makes installation and maintenance easy.
  • Inlet screen prevents debris from obstructing valve closure and improves seal life.
  • Manual tester or optional Posi-Prove system verifies seat closure integrity.
  • Visual position indication of both valves is standard.
  • Standard valve construction uses silicone-free lubricants.
  • Wide range of pipe sizes 3/4" through 3".
  • Maximum operating pressure differential up to 25 PSI.

The new Hydramotor actuator incorporates two separate means of releasing the actuator shaft when de-energized. The actuator enclosure meets Watertight, Dusttight, Driptight and General Purpose requirements and eliminates the cost associated with stocking separate actuators.

If you need more information  about the Hydramotor H113 Valve please contact ITT Controls at info@ittcontrols.com. Besides the Hydramotor H113 Valve we can deliver al other Hydramotor series as well.

image content

Drager ITT Hydramotor H12, H15 and H62

The Hydramotor H11 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The H11 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

The Hydramotor H12 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The H12 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

The Hydramotor H15 Shutoff Valve is a 2-way, normally closed valve with a steel alloy body. The H15 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

The Hydramotor H62 Shutoff Valve is a 2-way, normally closed valve with a carbon steel body. The H62 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

Almost all types of Hydramotor Valves are available at ITT Controls. If you don't know what type of valve is suitable for your configuration please don't hesitate to contact the sales department of ITT Controls at info@ittcontrols.com.

image content

Drager ITT Hydramotor AH90 / NH90

The AH90 / AH-90 and NH90 / NH-90 Hydramotors series are electro-hydraulic actuators. The actuators are widely used in nuclear power plant systems. They provide critical safety functions such as valve and damper operation. The Hydramotor AH90 / NH90 series are very reliable but regular maintenance and overhaul is very important.

Regular maintenance and repair of the Hydramotor AH-90 / NH-90 series will significantly reduce certain problems that would otherwise cause a Rule infraction or shutdown. Itt Controls can deliver the necessary parts of the hydramotor AH90/NH90 series and also can deliver the complete actuator.

The AH90 and NH90 Hydramotor Series of Linear Actuators features a completely self-contained, hydraulic power system that has been integrally coupled to a hydraulic cylinder. The positive, firm positioning actuators are ideal for providing efficient and
precise linear control of valves, dampers, louvers, and a wide variety of other equipment requiring an operating thrust of up to 1,500 lbs. (680 kg), 3,000 lbs (1,360kg), or 4,000 lbs. (1,800 kg).

The AH-90 and NH-90 Hydramotor Series of Linear Actuators is qualified as Class IE, safety related equipment for nuclear power generating stations in accordance with IEEE standards 323, 344, 382, and 627.

Other types of the General Controls Hydramotor ah series are: General Controls ah90, ah-90, ah91, ah-91, ah92, ah-92, ah93, ah-93, ah94, ah-94, ah95, ah-95, ah96, ah-96, ah97, ah-97, ah98, ah-98 and ah99, ah-99.

Other types of the General Controls Hydramotor nh series are: General Controls nh90, nh-90, nh91, nh-91, nh92, nh-92, nh93, nh-93, nh94, nh-94, nh95, nh-95, nh96, nh-96, nh97, nh-97, nh98, nh-98 and nh99, nh-99.

image content

ITT Drager Electro Hydraulic Motors

ITT Controls also provides universal throttle motors made by ITT Drager. ITT Controls also delivers the replacement equipment of these models. This electro-hydraulic motors are out of production but are still available via ITT Controls.

This electro-hydraulic motor is to replace the engines of all current and previous series electrohydraulic gas valves from 3/4 "to 3" screwed and flanged.

Various electro-hydraulic motor series are:

  •     ITT Drager SH-110
  •     ITT Drager SH-120
  •     ITT Drager SH-160
  •     ITT Drager SH-210
  •     ITT Drager SH-220
  •     ITT Drager SH-230
  •     ITT Drager SH-240
  •     ITT Drager SH-260
  •     ITT Drager SH-360
  •     ITT Drager SH-460
  •     ITT Drager SH-480

  •     ITT Drager SH-H110
  •     ITT Drager SH-H120
  •     ITT Drager SH-H160
  •     ITT Drager SH-H210
  •     ITT Drager SH-H220
  •     ITT Drager SH-H230
  •     ITT Drager SH-H240
  •     ITT Drager SH-H260
  •     ITT Drager SH-H360
  •     ITT Drager SH-H460
  •     ITT Drager SH-H480

  •     ITT Drager SH-HE110
  •     ITT Drager SH-HE120
  •     ITT Drager SH-HE160
  •     ITT Drager SH-HE210
  •     ITT Drager SH-HE220
  •     ITT Drager SH-HE230
  •     ITT Drager SH-HE240
  •     ITT Drager SH-HE260
  •     ITT Drager SH-HE360
  •     ITT Drager SH-HE460
  •     ITT Drager SH-HE480

  •     ITT Drager HOV110
  •     ITT Drager HOV120
  •     ITT Drager HOV160
  •     ITT Drager HOV210
  •     ITT Drager HOV220
  •     ITT Drager HOV230
  •     ITT Drager HOV240
  •     ITT Drager HOV260
  •     ITT Drager HOV360
  •     ITT Drager HOV460
  •     ITT Drager HOV480

  •     ITT Drager HO110
  •     ITT Drager HO120
  •     ITT Drager HO160
  •     ITT Drager HO210
  •     ITT Drager HO220
  •     ITT Drager HO230
  •     ITT Drager HO240
  •     ITT Drager HO260
  •     ITT Drager HO360
  •     ITT Drager HO460
  •     ITT Drager HO480

  •     ITT Drager GH110
  •     ITT Drager GH120
  •     ITT Drager GH160
  •     ITT Drager GH210
  •     ITT Drager GH220
  •     ITT Drager GH230
  •     ITT Drager GH240
  •     ITT Drager GH260
  •     ITT Drager GH360
  •     ITT Drager GH460
  •     ITT Drager GH480

  •     ITT Drager UHO110
  •     ITT Drager UHO120
  •     ITT Drager UHO160
  •     ITT Drager UHO210
  •     ITT Drager UHO220
  •     ITT Drager UHO230
  •     ITT Drager UHO240
  •     ITT Drager UHO260
  •     ITT Drager UHO360
  •     ITT Drager UHO460
  •     ITT Drager UHO480

  •     ITT Drager SHO110
  •     ITT Drager SHO120
  •     ITT Drager SHO160
  •     ITT Drager SHO210
  •     ITT Drager SHO220
  •     ITT Drager SHO230
  •     ITT Drager SHO240
  •     ITT Drager SHO260
  •     ITT Drager SHO360
  •     ITT Drager SHO460
  •     ITT Drager SHO480

If you need more information about the above ITT Drager Electro Hydraulic Motors please contact ITT Controls via info@ittcontrols.com