Connect with Us
  1. Brands
  2. Hydramotor

Hydramotor

Hydramotor Actuator H10 / H25Hydramotor Gas Valve AH4 / V710Hydramotor AH90 / NH90 electro hydraulic actuatorsHydramotor HV11, HV12, HV15 and HV62 Shutoff Valves
Hydramotor Gas Valves H117Hydramotor H113 Series Double Block ValveHydramotor Gas Valve AH14 / V710Hydramotor Gas Valve AH4 / V710
Hydramotor Gas Valve AH8 / V710Hydramotor AH90 / NH90 electro hydraulic actuatorsHydramotor HV11, HV12, HV15 and HV62 Shutoff ValvesHydramotor S107372 Actuator Replacement Kit
Hydramotor Actuator H24Hydramotor AH90 / NH90 electro hydraulic actuatorsHydramotor Actuator H10 / H25Hydramotor Actuator H11
Hydramotor S107372 Actuator Replacement KitHydramotor Actuator H11Hydramotor HV11, HV12, HV15 and HV62 Shutoff ValvesHydramotor Gas Valve AH14 / V710

Hydramotor

Hydramotor from ITT Barton or ITT General Controls offers a wide range of products and has many kinds of solenoid valves. We combine 100 years of experience with technology. HydraMotor offers a large selection of 2, 3 and 4-way solenoid valves. A solenoid valve, the electromagnetic part of the valve which consists of a coil. The valves of Hydramotor supplied by ITT Controls are made to the most demanding fluid control applications to execute.

A two-way (two-way) system has an input and an output and is used for the 'on' and 'off' by the liquid flow.
 
A three-way (3-way) system has three pipe connections and two orifices. If an opening is open, then the other closed and vice versa. In different positions (open, closed or universal), these valves are often used for an actuator or a single acting cylinder.
 
A four-way (4-way) system has four or five pipe connections (ports). A pressure inlet, two cylinder ports and one or two outputs to the pressure to perform.
 
Products of ITT Barton Hydramotor or ITT General Controls Hydramotor are the AH90, AH91, AH92, AH93, AH94, AH95, AH96, AH97, AH98 AH99, NH90, NH91, NH92, NH93, NH94, NH95, NH96, NH97, NH98 and the NH99. These linear actuators are equipped with a complete 'self-contained', hydraulic power system that is linked to an integral hydraulic cylinder. The actuators have an operating thrust up to 4,000 pounds (1,360 kg)
 
The AH90, AH91, AH92, AH93, AH94, AH95, AH96, AH97, AH98 AH99, NH90, NH91, NH92, NH93, NH94, NH95, NH96, NH97, NH98 and NH99 Hydramotor is classified as Class IE, safety related equipment for nuclear power plants in accordance with IEEE standards 323, 344, 382 and 627.
 
The AH90, AH91, AH92, AH93, AH94, AH95, AH96, AH97, AH98 AH99, NH90, NH91, NH92, NH93, NH94, NH95, NH96, NH97, NH98 and NH99 Hydramotor from ITT Barton and ITT General Controls are supplied by ITT Controls. Contact the sales department for the right product or component.

Other Hydramotor actuator series are: Hydramotor EHR 202, Hydramotor EHR 205, Hydramotor EMR 206.
 
Besides the HydraMotor products ITT Controls supplies an extensive line of products like electronic enhanced solenoid valves, miniature valves, valves process automation, pneumatic and air preparation equipment, fuel, gas and oil, ATEX approved pilot valves, sensors and pressure / temperature switches, proportional valves, navy / navy solenoid and pneumatic valves, and nuclear products.
 
Almost all products can ben shipped out the same day when ordered. Ask advice from our sales department if you do not know exactly what product you need.
 
All Hydramotor components / parts can be found and bought via ITT Parts. All Hydramotor parts and complete products are on stock and can be shipped immediately after payment has been received.
 
Look for other products in the petrochemical industry also to the rest of our website. You can mail us at info@ittcontrols.com

Website: www.hydramotor.nl

Hydramotor Gas Valve AH4 / V710

Hydramotor Gas Valves are with or without valve seal overtravel interlock (FM Proof of closure). For on-off main line gas control.

image content

Hydramotor Gas Valve AH8 / V710

The Hydramotor Gas Valve AH8 / V710 is a proportioning control with low fire positioning. It is a line voltage actuator which permits limit and safety controls to be wired directly into line voltage power circuit. The Hydramotor AH8 provides adjustable low fire positioning and proportioning control between low and high fire positions. It is a modulating, push-type, self-contained and electrohydraulic linear actuator. It features an electronic controller
for accurate positioning. The low-fire position is factory set at the stroke midpoint. It can be field adjustable to any position up to 100% of stroke.

image content

Hydramotor Gas Valve AH14 / V710

The Hydramotor AH14 / V710 actuator has a separate on-off and is electro-hydraulic. It is for use in conjunction with safety shut-off valves in semi-automatic gas-fired single burner, boiler and furnace applications.

image content

Hydramotor S107372 Actuator Replacement Kit

The Hydramotor S107372 Actuator Replacement Kit for HO Hydramotor Gas Valves is designed for use with HO Series Hydramotor Gas Valve bodies. It allows interchangeabillity of actuators without removing the existing HP valve body from the line. Consists of a new improved AH13 actuator and valve bonnet assembly together with all the necessary parts.

image content

Hydramotor Gas Valves H117

The Hydramotor H117 Fuel Gas Valve is a normally closed coombination of Hydramotor actuator and safety shutoff/control gas valve. It Is used for commercial and industrial burners in applications such as furnaces, dryers, dehydrators, conversion burners and heaters.

image content

Hydramotor Gas Valves H118

The Hydramotor H118 Fuel Gas Valve is a normally closed coombination of Hydramotor actuator and safety shutoff/control gas valve. It Is used for commercial and industrial burners in applications such as furnaces, dryers, dehydrators, conversion burners and heaters.

image content

Hydramotor Fuel Gas Valves H137

The Hydramotor H137 Fuel Gas Valve is a two-way, normally closed, safety shutoff valve providing trouble free, electrohydraulic, on-off control of combustion gas for boilers, industrial furnaces, dryers, dehydrators, large conversion burners, air heaters and similar applications.

image content

Hydramotor HV11, HV12, HV15 and HV62 Shutoff Valves

The Hydramotor HV11 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The HV11 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

image content

Hydramotor H30/H35 Actuator

The Hydramotor H30/H35 are electrohydraulic, linear actuators. They feature a completely self-contained, sealed, hydraulic motor/pump power unit coupled to a hydraulic cylinder container both piston/shaft assembly and return spring.

image content

Hydramotor Actuator H10 / H25

The Hydramotor Actuator H10 /H25 is a fail-safe electrohydraulic linear actuator. They feature a completely seld-contained, sealed, hydraulic motor/pump power unit coupled to a hydraulic cylinder containing both the piston/shaft assembly and return-spring.

The Hydramotor H10/H25 series are the result of over 50 years of experience in designing, testing, manufactoring and servicing electrohydaulically powered actuators.

H10 and H25 from the hydramotor series are available in both push an pull power stroke, with a choice of either spring-return or lock-in-last position upon loss of power.

Considerable field experience has proven the H10/H25 series to be extreme reliable. With minimum service requirements and a prolonged service life. The need for gears has been eleminated in favor of a modular design using fewer moving internal components and industry proven heat-resistant seals - immersed in oil for continuous lubrication.

The Hydramotor H10 and H25 series are available at ITT Controls. For more info about the H10 or H25 series you can contact ITT Controls at info@ittcontrols.com

image content

Hydramotor Actuator H11

The Hydramotor Actuator H11 is a two position, spring-return, pull-type shaft that retracts on application of power and spring-returns on loss of power.

The Hydramotor H11 serie is the result of over 50 years of experience in designing, testing, manufactoring and servicing electrohydaulically powered actuators.

H11 serie of hydramotor is available in both push an pull power stroke, with a choice of either spring-return or lock-in-last position upon loss of power.

Considerable field experience has proven the H11 series to be extreme reliable. With minimum service requirements and a prolonged service life. The need for gears has been eleminated in favor of a modular design using fewer moving internal components and industry proven heat-resistant seals - immersed in oil for continuous lubrication.

The Hydramotor H11 serie is available at ITT Controls. For more info about the H11 series you can contact ITT Controls at info@ittcontrols.com

image content

Hydramotor Actuator H24

The Hydramotor H24 serie is a two-postion, lock-in-last Position, pull-type. The shaft retracts on application of power; lock-in-last position on power failure, spring-return when relief valve is energized. Normally-closed relief valve wired independently of motor circuit.

The Hydramotor H24 serie is the result of over 50 years of experience in designing, testing, manufactoring and servicing electrohydaulically powered actuators.

H24 serie of hydramotor is available in both push an pull power stroke, with a choice of either spring-return or lock-in-last position upon loss of power.

Considerable field experience has proven the H24 series to be extreme reliable. With minimum service requirements and a prolonged service life. The need for gears has been eleminated in favor of a modular design using fewer moving internal components and industry proven heat-resistant seals - immersed in oil for continuous lubrication.

The Hydramotor H24 serie is available at ITT Controls. For more info about the H24 series you can contact ITT Controls at info@ittcontrols.com

image content

Hydramotor H113 Series Double Block Valve

The patent pending design of the Hydramotor incorporates a single aluminum body containing two distinct shutoff valves and one new watertight Hydramotor actuator. An optional and patent pending Posi-Prove system dynamically tests valve seal tightness and conducts a self-check automatically upon system startup.

The patent pending double block valve design of the Hydramotor H113 incorporates the following unique features:

  • Two shut-off valves within a single body reduces gas train length and cost.
  • Two independent operating shafts accomplish valve closure.
  • Unique flange design makes installation and maintenance easy.
  • Inlet screen prevents debris from obstructing valve closure and improves seal life.
  • Manual tester or optional Posi-Prove system verifies seat closure integrity.
  • Visual position indication of both valves is standard.
  • Standard valve construction uses silicone-free lubricants.
  • Wide range of pipe sizes 3/4" through 3".
  • Maximum operating pressure differential up to 25 PSI.

The new Hydramotor actuator incorporates two separate means of releasing the actuator shaft when de-energized. The actuator enclosure meets Watertight, Dusttight, Driptight and General Purpose requirements and eliminates the cost associated with stocking separate actuators.

If you need more information  about the Hydramotor H113 Valve please contact ITT Controls at info@ittcontrols.com. Besides the Hydramotor H113 Valve we can deliver al other Hydramotor series as well.

image content

Hydramotor H12, H15 and H62 Shutoff Valves

The Hydramotor H11 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The H11 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

The Hydramotor H12 Shutoff Valve is a 2-way, normally closed valve with a bronze body. The H12 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

The Hydramotor H15 Shutoff Valve is a 2-way, normally closed valve with a steel alloy body. The H15 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

The Hydramotor H62 Shutoff Valve is a 2-way, normally closed valve with a carbon steel body. The H62 series is suitable for water, oil, gas and steam. It is an electrohydraulic linear actuator and has an extended iron cast.

Almost all types of Hydramotor Valves are available at ITT Controls. If you don't know what type of valve is suitable for your configuration please don't hesitate to contact the sales department of ITT Controls at info@ittcontrols.com.

image content

Hydramotor AH90 / NH90 electro hydraulic actuators

The AH90 / AH-90 and NH90 / NH-90 Hydramotors series are electro-hydraulic actuators. The actuators are widely used in nuclear power plant systems. They provide critical safety functions such as valve and damper operation. The Hydramotor AH90 / NH90 series are very reliable but regular maintenance and overhaul is very important.

Regular maintenance and repair of the Hydramotor AH-90 / NH-90 series will significantly reduce certain problems that would otherwise cause a Rule infraction or shutdown. Itt Controls can deliver the necessary parts of the hydramotor AH90/NH90 series and also can deliver the complete actuator.

The AH90 and NH90 Hydramotor Series of Linear Actuators features a completely self-contained, hydraulic power system that has been integrally coupled to a hydraulic cylinder. The positive, firm positioning actuators are ideal for providing efficient and
precise linear control of valves, dampers, louvers, and a wide variety of other equipment requiring an operating thrust of up to 1,500 lbs. (680 kg), 3,000 lbs (1,360kg), or 4,000 lbs. (1,800 kg).

The AH-90 and NH-90 Hydramotor Series of Linear Actuators is qualified as Class IE, safety related equipment for nuclear power generating stations in accordance with IEEE standards 323, 344, 382, and 627.

Other types of the General Controls Hydramotor ah series are: General Controls ah90, ah-90, ah91, ah-91, ah92, ah-92, ah93, ah-93, ah94, ah-94, ah95, ah-95, ah96, ah-96, ah97, ah-97, ah98, ah-98 and ah99, ah-99.

Other types of the General Controls Hydramotor nh series are: General Controls nh90, nh-90, nh91, nh-91, nh92, nh-92, nh93, nh-93, nh94, nh-94, nh95, nh-95, nh96, nh-96, nh97, nh-97, nh98, nh-98 and nh99, nh-99.



image content